I have a scenario where I have 2 ISPs and they both have default route
route ISP1 0 0 126.96.36.199 1
route ISP2 0 0 188.8.131.52 2
i need network 192.168.1.0 to go out with ISP2 not ISP1
how can i do this in Cisco ASA
Go to Solution.
You can configure PBR:
route-map PBR_MAP permit 10match ip address ISP2_TRAFFICset ip next-hop 184.108.40.206
ACL ISP2_TRAFFIC match the traffic you want to send through ISP2 (220.127.116.11): 192.168.1.0/24.
Apply the route map to the inside interface where the traffic originates.
interface insideip policy route-map PBR_MAP
View solution in original post
@Mohammed.Fawzi to route a specific network out a different ISP than the default route then you will need to use Policy Based Routing (PBR). Example:- https://integratingit.wordpress.com/2020/03/01/asa-policy-based-routing/
its worked,thank you soo much
You're very welcome @Mohammed.Fawzi.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: