09-19-2013 07:35 AM - edited 03-11-2019 07:40 PM
HI All,
I have cisco asa 5520 firewall where currently I am running 8.2.5 IOS
I need to upgrade the same to 9.0
Can any one let me know what is the best procedure for doing the same
09-19-2013 10:25 AM
Hi,
You can upgrade directly to 9.0 but few important points to remember..
1. Version 8.3 and up - 5520 needs 2GB memory. Make sure ASA got enough memory.
2. There are nat statement syntax changed from 8.3 on. IOS will convert the config but make sure you read and understand all the syntax changes.
https://supportforums.cisco.com/docs/DOC-9129
3. Once you are ready, make sure you got backup of exsiting config (incase of roll back) and the procedure simply use a tftp server to copy IOS file to ASA flash and reboot.Check the below link.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
hth
MS
11-10-2013 01:05 AM
Thanks mvsheik
But can you let me know if I can use any tool for the same or software
11-10-2013 08:32 AM
You need access to the dowload section at cisco.com to do this. Contact your reseller or cisco to do this.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide