04-28-2014 11:58 AM - edited 03-11-2019 09:07 PM
We have a Cisco ASA 5520 and I need to view the maintenance release version. When I do a show version I see 8.2(5) and when I view the file in flash I don't see details of the maintenance number.
I'm checking our ASA due to the bulletin below where its mentioned to have 8.2(5.47) or 8.2(5.48) but I can't find the .47 or .48 on the ASA.
Thanks for any help.
Jeff
http://www.cisco.com/c/en/us/support/docs/csa/cisco-sa-20140409-asa.html#@ID
Solved! Go to Solution.
04-28-2014 12:44 PM
The maintenance releases (sometimes referred to as interim builds) are usually not published on the download portal. If you have a documented need for one (as is the case with this SA), the TAC can give you access to download the necessary build.
Once you've reloaded with that version as your boot image, your "show version" will then show it as running.
04-28-2014 12:44 PM
The maintenance releases (sometimes referred to as interim builds) are usually not published on the download portal. If you have a documented need for one (as is the case with this SA), the TAC can give you access to download the necessary build.
Once you've reloaded with that version as your boot image, your "show version" will then show it as running.
04-28-2014 02:19 PM
Thank you for the reply.
Jeff
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide