06-08-2011 01:06 AM - edited 02-21-2020 04:22 AM
Dear Concern,
I have installed CSC-SSM-10 on cisco ASA 5520.
I am facing two problems
Problem 1 : When I send traffic from ASA to SSM module then internet connection becomes slow and sometimes internet session disconnected.
2. When I try to manual update then following erros shows please see attachment .
Please note that I can ping internet from CSC module. please suggest me to resolve these problems.
Regards
Imran
Solved! Go to Solution.
06-11-2011 05:01 AM
Hi Imran,
I'm glad it's working after fixing the DNS configuration.
For viewing the CSC logs, you can use any of the 4 options:
1. Viewing from the Logs > Query menu in the Trend Micro admin page (this is a fixed size buffer)
2. Manually exporting the Logs from the Trend Micro admin page to a CSV file
3. Sending the logs to a syslog server (under Logs > Settings)
4. Using the Content Security monitoring tab in ASDM
Hope that helps.
-Mike
06-08-2011 12:28 PM
Hi Imran,
It looks like your CSC module doesn't have a working connection to the Internet. Please confirm the following:
1. There is an Ethernet cable connected to the CSC's management port
2. The network settings on the CSC are correct (IP address, netmask, gateway, and DNS servers)
The CSC module must be able to access the Internet for it to work properly.
-Mike
06-08-2011 10:22 PM
Dear Concern,
Thanks for your reply.
As per your query please note that
For your info , I can ping internet from CSC module.
Regards
Imran
06-10-2011 09:28 AM
Hi Imran,
Since you are able to ping an Internet IP address from the CSC, please verify the DNS server configuration on the CSC's network settings. If it is unable to resolve DNS, connectivity will still fail.
-Mike
06-10-2011 10:35 PM
Dear Mike,
thanks for the update.
I have checked DNS entry but no expected result.
Please note that I have only base license , Plus license expired. Do you think this is happening due to Plus license.
I have update CSC module image and internet slow issue has been resolved.
Please check the log.
Regards
Imran
06-11-2011 01:26 AM
Dear Mike,
thanks a lot ! Its working , problem was in the DNS entry.
Would you please tell me , is there any S/W to monitor CSC Log like IEV for IPS module.
thanks
Imran
06-11-2011 05:01 AM
Hi Imran,
I'm glad it's working after fixing the DNS configuration.
For viewing the CSC logs, you can use any of the 4 options:
1. Viewing from the Logs > Query menu in the Trend Micro admin page (this is a fixed size buffer)
2. Manually exporting the Logs from the Trend Micro admin page to a CSV file
3. Sending the logs to a syslog server (under Logs > Settings)
4. Using the Content Security monitoring tab in ASDM
Hope that helps.
-Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide