Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I'm having problems understanding how to allow access from a DMZ interface to an internal interface.We have:DMZ |ASA > switch > ASA -- InsideThe DMZ is 172.16.10.12Inside is 10.10.1.6How can I allow 172.16.10.12 access to communicate to 10.10.1.6?The...

Hi all...I have a PIX 515 with 6 interfaces.My goal is NOT to have redundant ISPs.  My initial goal is to provide a 2nd public IP address that can receive email in the event that my primary WAN link goes down.So far, this is what I have.interface eth...

I tried the solution posted at https://supportforums.cisco.com/message/3390056#3390056 however it did not work on my ASA5505 8.4(2). I thought that it may be because I only have a single public address so the web server is responding to port forwardi...

joeippolito by Community Member
  • 1512 Views
  • 4 replies
  • 0 Helpful votes

Hi,I have got a problem to access to the servers inside the LAN through VPN tunnel after setting up the firewall on the Cisco 881-K9 router.The configuration, attached file (RunningConfig_with_vpn_before_firewall_enabled.txt), is working fine for VPN...

phyopaingag by Community Member
  • 1294 Views
  • 1 replies
  • 0 Helpful votes

I've recently set up a LAN-2-LAN VPN tunnel to a 3rd party service provider who uses RFC 1918 private addressing internally and cannot perform NAT on their side of the tunnel.  In order to avoid conflicts with our address space I've had to implement ...

Hey all,Quick question.In terms of configuring the IPS, what's the difference in the experience using the CSM vs. the IME? I have a PC running IME here at office but I'm having issues installing the CSM so I haven't been able to try it out. I am, how...

     I am going to update my Windows Small Business Sercer 2003 to 2011.I currently have an ASA 5505 with the IPS installed on it. I am reviewing the  migration procedures from Microsoft. Within the procedure it asks if the firewall or router support...

terry1337 by Community Member
  • 12950 Views
  • 2 replies
  • 0 Helpful votes