ā09-04-2018 04:16 PM - edited ā02-21-2020 08:11 AM
i neet to replace my asa 5515 with asa5516x with firepower. i'm using nat on asa connected outside to peplink and a have other nat configured on ISP router so i need to know if the twice nat (1st asa and 2nd on ISP router) can creat any trouble for the IPS fonctions?
Solved! Go to Solution.
ā09-04-2018 05:57 PM
Hi,
There should be no problem it should work fine.
Thanks
John
ā09-04-2018 04:29 PM
Hi,
There should be no problems with IPS functions if the firepower is configured to just look at the traffic moving through the firewall.The firepower should just be looking at the traffic and not doing any modifications.
Thanks
John
ā09-04-2018 05:27 PM - edited ā09-04-2018 05:29 PM
hi,
thank you for your request. so when i will apply my policys ruels on IPS for exemple to block or pemit trafic then it will be work without any trouble or not ?
ā09-04-2018 05:57 PM
Hi,
There should be no problem it should work fine.
Thanks
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide