ASA5506 ASDM cannot connect to FirePower module

[rdsalmans]

I'm using the default ASA config (inside is 192.168.1.1/24) and setup the FirePower module to use 192.168.1.2/24. Both the interface 2 and the MAN1/1 are in the same switch as is my management machine. I can ping the FirePower module from my PC and from the ASA's CLI. However I cannot connect to the FirePower module on port 443 via web, and telnet to 443 does not give a null session so there's no services running on 443.

I've ran "show module" and the sfr module is Up/Up, and I have IP comms with the module from the ASA CLI. Does anyone have any other ideas before I call TAC? TIA!

[digitaltrance]

Does anyone have an answer to this? I am having the same problem, except I can't ping the FirePOWER  module from my PC.

I have the internal g1/2 address of 192.168.1.1, the FP Module IP is 192.168.1.254

I am connected like this:

http://www.cisco.com/c/dam/en/us/td/i/400001-500000/410001-420000/415001-416000/415358.eps/_jcr_content/renditions/415358.jpg