04-06-2020 06:10 AM
New to Firewall Management and need some help. We have a couple User Accounts setup in Cisco ASDM. We htought these users were for the ability to login directly to the Firewall from "outside" our network. Is that what these users are for? Do I login to our WAN IP? How do these users login. Thanks for any advise!
04-06-2020 06:44 AM
Hi,
Yes, these use accounts do have admin rights to login to ASDM. To configure access to login from the outside you would need to ensure you permit access "http 0.0.0.0 0.0.0.0 outside". The users need to open a web browser, enter the outside ip address and then download ASDM.
The user accounts could be also be used for remote access (however they do have full admin rights, so they could manage the ASA also).
HTH
04-06-2020 07:00 AM
Do I need an IP setup for HTTP? I have 3 in here for SSH.
Also, how do I know which IP address to use when I logon using web browser? Thank you for your help!
04-06-2020 07:04 AM
04-06-2020 07:26 AM
Here is what I have under Access and NAT Rules.
04-06-2020 07:32 AM
04-06-2020 07:43 AM
I am believing it would be the same as the outside-network in my Network Objects.
04-06-2020 07:53 AM
04-06-2020 08:21 AM
Okay, I found that IP address, so now do I need to setup an Access Rule for that IP address? Thank you!!
04-06-2020 08:26 AM
04-06-2020 08:38 AM
Does it make a difference if I already have a ASDM/HTTPS setup for Management at 0.0.0.0? Not sure if I can have both. Thanks!
04-06-2020 08:44 AM
04-06-2020 08:52 AM
I get an error when trying to add
04-06-2020 08:58 AM
04-06-2020 09:02 AM
I had not hit apply yet when I took that screenshot. So will it work if I just have the Outside set for ASDM/HTTPS and not Management?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide