We have an ASA in a colo environment that has a full 100Mbps Internet connection. we are billed at a 95th percentile rate and want to limit ourselves to 34Mbps. I believe this can be done by traffic shaping. I want all traffic affected by this. Our inside is split up by 4 different vlans. I have a feeling this makes this more complicated.
Does this example I found do what i want (except for the bandwidth being off):
pixfirewall(config-pmap)#policy-map PM-SHAPER
pixfirewall(config-pmap)# class class-default
pixfirewall(config-pmap-c)# shape average 2000000 16000
pixfirewall(config-pmap-c)# service-policy PM-SHAPER interface outside
Thanks in advance!