ASA5515 - interface ospf message-digest-key 3 md5 password change after clogin run

[NetAdmin2]

After doing some tests with clogin, the configuration of the interfaces had been changed.

From ospf message-digest-key 3 md5 W@tytl#3459Qaz  -->>    ospf message-digest-key 3 md5 *****

From

! - before clogin tests
        interface GigabitEthernet0/1.128
         vlan 128
         nameif Z128
         security-level 100
         ip address 172.19.147.1 255.255.255.0 standby 172.19.147.2
         ospf message-digest-key 3 md5 W@tytl#3459Qaz
         ospf authentication message-digest
!

to

! - after clogin tests
        interface GigabitEthernet0/1.128
         vlan 128
         nameif Z128
         security-level 100
         ip address 172.19.147.1 255.255.255.0 standby 172.19.147.2
         ospf message-digest-key 3 md5 *****
         ospf authentication message-digest
!

Q1: Is this a normal behavior of clogin, to change a configuration, once you run it ?

Q2: Is this change affecting in any way the ospf process or the configuration once you reboot the firewall ?

Thank you.

[balaji.bandi]

ospf message-digest-key 3 md5 *****

this is normal - save the config.

[NetAdmin2]

Thank you Balaji.

When you say save the config - what that means ? The clogin test or me as a person ?

If I saved the config, and I'm planing to do a reboot of ASA, is the ospf going to work properly ?