12-17-2012 06:45 PM - edited 03-11-2019 05:38 PM
Hi all,
Can someone help me regarding this one? Our Firewall is just new. ASA5525X
Today, during a packet_trace to debug a routing problem, the active ASA
- thsasaprd02 - crashed suddenly.
I was able to copy-paste the console - including the command that triggered it - After the reboot I ran the command again, on the same ASA - after doing a manual failover - the command succeeded normally.
Below are the details of the crashdump.
Solved! Go to Solution.
12-18-2012 03:49 AM
John,
This is most likely due to:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud70273
Please open a TAC case so we can investigate in depth.
M.
12-18-2012 03:49 AM
John,
This is most likely due to:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud70273
Please open a TAC case so we can investigate in depth.
M.
12-18-2012 08:07 PM
Hi Marcin,
I have email and contact Cisco TAC already. They will not support the issue because we don't have service contract for our new Firewall. We only want to find out what is the cause of the crash. Is there any way to analyze the file?
I cannot see the details of the link you posted regarding the bug toolkit. Can you give me a screenshot instead?
J.N.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide