06-08-2013 05:10 PM - edited 03-11-2019 06:55 PM
hi guys,
i need lil advise ... we got two new asa with ips and licenses... as in x series it is software module except 5585x.... i have a guide on how to setup ip, upload image for ips send traffic etc etc... as ips can be setup diff ways n flavors like host based/ network based and signatures and honey pot etc etc... them can be done with sensors but not sure if can be done with x series software module.... as documentation i have got has basic stuff like forwarding traffic to module ip etc.... i need to know if same tweaking can be done with software module as with sensors , also for logging and monitoring can i use IME OR CISCO SECURITY MANAGER ? or if you guys can advice of something else? thanks
Solved! Go to Solution.
06-08-2013 07:35 PM
Hello.
So traffic must reach the asa so we can redirect it to the IPS. That's the only way the traffic get inspected by it
U can use IME with no problems at all. I have not tried with CSM but I guesa u should be fine. .
Sent from Cisco Technical Support Android App
06-08-2013 07:35 PM
Hello.
So traffic must reach the asa so we can redirect it to the IPS. That's the only way the traffic get inspected by it
U can use IME with no problems at all. I have not tried with CSM but I guesa u should be fine. .
Sent from Cisco Technical Support Android App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide