ASDM 7.5(1) Bug?

[gadamecz]

I am not able to change interface security level through the ASDM. (I can change it through the CLI.)

It always comes back as the interface was not specified.

The screen captures are attached.

Am I doing something wrong?

Thanks

[Vibhor Amrodia]

Hi,

This is this Defect:-

https://tools.cisco.com/bugsearch/bug/CSCuw09242/?reffering_site=dumpcr

Thanks and Regards,

Vibhor Amrodia

[gadamecz]

Thanks for the quick reply.

I am able to create the interface through the ASDM, it just fails to set the security level.

I cannot modify any of the security levels through the ASDM.

Thanks

[Vibhor Amrodia]

Hi,

Yes , this is the only defect for the issue as you already have 2 Interfaces configured.

Try to downgrade the ASDM and see if you still see the same issue

Thanks and Regards,

Vibhor Amrodia

[gadamecz]

I went back to 7.4(3). The problem exists.

I downgraded to 7.1(7) and it works fine now.

Thanks

[Vibhor Amrodia]

Yeah , I think this was tested on ASDM 7.4.2 and 7.4.1 and that seems to work too.