09-14-2015 08:59 AM - edited 03-11-2019 11:35 PM
Hello,
I have access to my ASA 5540 firewall remotely but I am unable to access the webpage when i use this address to install ASDM
https://x.x.x.x (IP of my ASA FW)
http server is enabled on my firewall as well
it also gives me results when i run this command on my FW : show run asdm
what could be the problem?
Thanks,
Kunal
Solved! Go to Solution.
09-14-2015 10:34 AM
Hi Kunal,
You have mentioned that you are able to connect to the firewall remotely. Are you referring to remote VPN to connect to ASA ?
You can try a different port on ASA for https access by command:
http server enable port-number
Also enable http debug and check what error you are getting on ASA.
debug http 255.
Thanks,
R Seth
09-14-2015 10:34 AM
Hi Kunal,
You have mentioned that you are able to connect to the firewall remotely. Are you referring to remote VPN to connect to ASA ?
You can try a different port on ASA for https access by command:
http server enable port-number
Also enable http debug and check what error you are getting on ASA.
debug http 255.
Thanks,
R Seth
09-14-2015 11:05 AM
R Seth,
Yes its a remote VPN to connect to ASA
and I am using that Nat VPN IP in address bar to reach out to install ASDM
but unable!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide