cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1375
Views
0
Helpful
3
Replies
amjadkhan1920
Beginner

ASDM

Dear all,

 

something is string for me once i make changes or make new ipsec tunnel its working fine but the parameter for other which is already exist also changed automatically ,

i attached the picture once i make the new one automatically changed for existing one and make problem for me while the priory is different 

 

IKE V1  policy 

1 ACCEPTED SOLUTION

Accepted Solutions

If you are saying if you make that change it causes issues with other VPNs, then just create a new IKEv1 policy with the correct settings.

View solution in original post

3 REPLIES 3
Rob Ingram
VIP Mentor

Hi,
You should change the "DH Group" to "5" on ikev1 policy 72. You can also change the priority to less than 70 so it would be processed before the existing ikev1 policy 70...in order to match the other ASA.

HTH

dear sir,

yes i do this but i have more than 20 ipsec once you make new ipsec and keep the priority is efferent from existing so it effect my 3 or 4 another site

If you are saying if you make that change it causes issues with other VPNs, then just create a new IKEv1 policy with the correct settings.
Create
Recognize Your Peers
Content for Community-Ad