Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all, hope you are safe from corona19 i need your help we have access from home to our office due to cornoa i have multiple group for remote access but one group name hokairmailclient i added more than 80 users but some user (ip address) with sam...
Dear all,below lab R1 1.1.1.1/8 wan ip and lan ip 192.168.1.1/24 R3 wan ip 11.11.11.2/29 &lan 172.16.0.0/16now i make ipsec between above network successfully establish ,but the task is there is a secondary ip of the router R3 10.10.10.1/24 to estab...
Dear all, something is string for me once i make changes or make new ipsec tunnel its working fine but the parameter for other which is already exist also changed automatically ,i attached the picture once i make the new one automatically changed for...
dear all, please need you attention i have 2960 switch and connected with router with UTP distance is approximately 60 to 70 meter before it was working fine now i try to ping from l2 switch to router i facing drops and the switch seems like hanging ...
dear all,i am facing problem with IPSEC tuneel the traffic between interest( private ip ) is dropping due to this dropping my remote desktop and data transfer is not able to success while from remote pc to internet there is no drops but from HO to b...
dear sir, below is the result , but from pc to pc not pinging . R1#sho crypto isakmp saIPv4 Crypto ISAKMP SAdst src state conn-id status11.11.11.3 1.1.1.1 QM_IDLE 1003 ACTIVE11.11.11.3 1.1.1.1 MM_NO_STATE 1002 ACTIVE (deleted)11.11.11.2 1.1.1.1 MM_NO...
dear sir,yes i do this but i have more than 20 ipsec once you make new ipsec and keep the priority is efferent from existing so it effect my 3 or 4 another site
