Resolved! Sourcefire MIB's
Hi , Could you please advise how can i get SNMP MIB's for Sourcefire Management center and IPS's for my management server (Op Manager). Thanks,
Hi , Could you please advise how can i get SNMP MIB's for Sourcefire Management center and IPS's for my management server (Op Manager). Thanks,
Hi we are having asa5510 firewall in our office in which we were connected 20mbps internet. but recently we upgraded to 400mpbs internet but when we check the speed test its showing only 100 mbps. so can anyone advice me whether asa 5510 outside in...
Hi, I have downgraded an 5506 from firmware version 9.7.1 to 9.3.1 remotely. After reloading, operation is still functioning but I cannot log in with my set of usernames and passwords. Any ideas what I might did wrong ? This is a very unpleasant sit...
Given these addresses and ACLs:!interface GigabitEthernet0/0 nameif outside security-level 0 ip address 192.168.1.1 255.255.255.0!interface GigabitEthernet0/1 nameif inside security-level 100 ip address 10.1.1.254 255.255.255.0!object network WebServ...
Hi Guys I want to configure Wireless Dot1X with Guest Users, what i understood, I have to configure "Activated Guest" to make it work along with Dot1X. I found Guest Role option in following manner in version 1.x Administration > Web Portal Manageme...
Hello all, I have just recently installed the FirePOWER services module on our ASA 5512-X and I had a few questions I wanted to run by the community about it. So far I have been able to grasp it but there where a few things I would appreciate some c...
We have to Cisco ASA's at a customer site. At the moment they are in single context mode (active/passive) and thus used for failover. We want to change this to an active/active configuration but the problem is that we use remote access VPN. We need t...
We have an old legacy application which connects to a third party via SSL. The third party provider is limiting connections to using TLS 1.2 beginning in June. Our legacy application can only support TLS 1.0. Upgrading the application seems to be not...
Hi, If I want to call a access-list in class-map, I can configure it like this: access-list user-acl extended deny tcp host 192.168.1.2 any eq www access-list user-acl extended permit tcp any any eq www class-map block-user-class match access-list ...
Hi All, Is it possible to add multiple ACL entries is ASA with same line number? When we use NAME instead of line number in conf command then how the asa decide to assign a number to that entry? Can the firewall assign same number to multiple entries...
I've been scratching my head on this one for the past few days. I cannot figure it out and I'm sure it's something I'm missing. I could really use somebody's help. So I recently installed a Cisco ASA 5505 and finally got it configured and up and run...
I am needing some assistance in the best way to create an ACL or some network-object group for all the Office 365 URL's and IP's that go into running the different features. We have a proxy device that is getting hammered due to it not being large e...
was wondering if anyone has had a situation like this: i installed a new license on a particular asa 5500 series router the router has failed and i wanted to put the same license on the replacement. Is there a way this can be done? the actual equipme...
Hello team, I have a cisco 5515 asa with firepower services.the device is currently working as onbox asdm management.i have tamc license already installed in it. i have an active directory server which i need to authenticate with the Cisco ASA.And i ...
Hello there, I have a cisco ASA 5505 ver 8.2(5). I am new to firewall concept. The purpose of this firewall is to use it for the OPC system to access our computer. I have configured the internal and external interface IPs as shown in the attachment. ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-14-2026 01:46 AM | ||
| 11-12-2026 11:33 AM | ||
| 11-12-2026 12:41 AM | ||
| 11-06-2026 12:20 AM | ||
| 09-22-2026 04:13 PM |
| User | Count |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |