Hey all, I need to pick your brains on this one as I have run out of ideas and still cannot figure out why I am unable to reach new destinations. Just recently we added a new site into our WAN estate and connectivity is over SHDS to the other end. B...
Folks Ive been having issues with the time sync on ASA5512-x. Currently the firewall is configured to sync its time to a server 2003 PC (not a domain controller), this pc has been configured to run NTP (add a LocalNTP DW_WORD key to registry), Loca...
Here's a perl script that connects to an IPS device and then (when passed -l) logs to a file, somewhat simulating syslog. Without -l it will just log to screen, giving a nice pretty colour-coded output. It uses xsltproc and a stylesheet to translate ...
I have two firewall units ASA 5525 and ASA 5525-X with the same software version (ASA 9.15) and same licence Anyconnect premium. I want to setup these units as a HA pair. Cisco documentation says that the hardware units need to be indentical. Does an...
Hi All, I tried to add a second asa5515x to the firesight management center but it indicates that is not allowed I have added the manager in cli command line : conf manager add à.@.@.@.@ cisco123 Is there any suggestion?
Hi Experts,Good Day!I'm new into this CSM, does it support secured(encrypted) syslog messages?Thanks.
Hi all, i have cisco ASA which cover CME inside the network, i config IPsec site-to-site VPN, NAT static, also some ACL. i've allow SIP TCP and UDP but it seem still cannot allow RTP/UDP from outside to inside, the clue was ip phone can call and ring...
I'm new to Cisco ASAs, and have the task of replacing older 5520s with out-of-the-box 5515Xs. I'd like to do a direct swap-out replacement, using a minimally revised startup-config from the older ASA, but I'm guessing that there are differences betw...
AS we are using firewall .our link is up and working fine but we are not able to ping aur edge router beacause of that we are not able to use IP sla. basicly ip sla use icmp to ping edge router kindly help regarding same
Hello, At the boot up of the ASA 5505 device, the status LED remains red, i have used a console port to connect but nothing seems to be responding. i dont know if it's a hardware issue or software, please any help is greatly appreciated. ----------...
Hi everyone I've some question about asa5555, it can't communicate between subinterfaces (vlan 501(iLo) and 503(OOB)). I've config nat(OOB,iLo) static any any already but it doesn't work. Please guide me, show running config are below PPCIASA801# sh...
Hello, I have always wondered how to do this for years. Say I have a email server with a private IP 10.10.10.10 that is NATed to a public IP 50.244.244.241. How do you allow hosts on the 10.10.10.x network to talk to the 50.244.244.241 IP address ins...
Hi Team, How to download the image that has been uploaded to flash or in disk?
Trying to add a static route: static (inside,outside) x.x.x.x 192.168.0.2 netmask 255.255.255.0 Receiving the attached error. Is it a different syntax to add this command on the 5506X?
When creating a rule with the action of trust, do you have to create an opposite direction rule for the return traffic or does it automatically include that traffic in the return flow? Basically I have rules for inside to outside. Do i need the oppos...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-05-2026 10:49 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM |
