Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Unboxed a new ASA5506-X, powered up and started following the quick start guide.  I don't have a inside switch and don't need the Firepower configured.  I connected a PC to gi1/2, received an IP address 192.168.1.5.  According to the Quick Start Guid...

Hi,I've got a 2960-x running SSHv1.1) I need to disable SSHv1 and only run V2. Will the line listed below run ONLY SSHv2 and disable V1?2) I need a cisco document that says SSHv1 can  be completely disabled and only V2 runs on a 2960x.I know that I n...

Dear All, This is my first post in the Cisco community. We bought a ASA 5506-X and it is already configured. The ASA came with a base license already installed. In the box was a sheet with the PAK key (Control license). I tried to register the PAK ke...

Hi,I have ASA Firewall that will host both our Anyconnect VPN and clientless SSL Webvpn. I am planning to install public CA cert. It will require two certs , one for each vpn. The ASA hostname will not be just a regular firewall hostname. I am cautio...

S891 by Level 5
  • 1578 Views
  • 3 replies
  • 0 Helpful votes

HiI have a HA pair of firewalls with single Public IP. On the inside I just have a directly connected network with a /24 subnet. I host a few management applications on the internal network and a Windows Server.I want to RDP into my Windows Server fr...

Hi there I'm using a Cisco asa 5506-x device with the ASDM version 7.4 I'm trying to allow for users to RDP into my computers on a network. I've created a NAT Network object with the IP address of the device, and the port I want it to allow RDP into ...

gsimon by Community Member
  • 1590 Views
  • 7 replies
  • 0 Helpful votes

helloI have a Cisco 2921 ISR router and want to configure the firewall part, currently I am using this router for corporate network & I have a site-to-site VPN, and currently I am securing the FW/Router only through ACLsasking for your support for th...

ahmed.hts by Community Member
  • 2113 Views
  • 2 replies
  • 0 Helpful votes

Hey guys, I am trying to consolidate 2 different firewalls into another ASA 5520 active/standby firewall, and only have 1 interface available, I wanted to make sure that I can use sub-interface for site-to-site VPN, anyconnect, and also another sub-i...

Review Cisco Networking for a $25 gift card