Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I have some major issues with unexplained devices showing up as wireless connections. These devices show up as being Cisco devices when i trace the mac. Not sure what else to say other than it has to be someone trying to access my machines remotely. ...

kuugkuug1 by Community Member
  • 810 Views
  • 2 replies
  • 0 Helpful votes

Dear All Master is that possible ASA5512-X include Firewall + IPS + Context-Aware in single box ?If possible, so buy "ASA5512-IPS-K9" + "ASA5512-AW1Y-PR=" ?for enable Context-Aware in ASA5512-x, we need to buy PRSM (Prime Security Manager) ?Thanks,Su...

hi i have an asa 5520 with AIP SSM-40i did basic configuration on the SSM and i was ok till i decided to forward traffic to IPS.i use service policy on ASA->Firewall->Service policy rules and add new rule for IPSthe rule was added to Global Service p...

mshabani363 by Community Member
  • 616 Views
  • 1 replies
  • 0 Helpful votes

I am moving a network from a n7k to an ASA.  With the network on the ASA, the clients on the local subnet are not getting IP addresses from the DHCP server. Years ago, I moved the network a 6500 to the N7k.  I recall adding "ip dhcp relay subnet-broa...

rmeans by Level 6
  • 1183 Views
  • 3 replies
  • 0 Helpful votes

Hi All,I recently acquired a new site. The firewall is running new code NAT, and the following statement is configured:object network LAN subnet 192.168.175.0 255.255.255.0nat (inside,outside) source static LAN LAN no-proxy-arp route-lookup Can anyon...

Hello ALLI just bough a Cisco ASA5505 device, I need to lunch the ASDM and I end up with an error ((cannot display the page)) or ((you have to enable TLS 1.0, TLS 1.1, TLS 1.2)) even they are already enabled in my browser. Then I went step by step to...

Hi, Wondering if there is any way on the ASA to redirect ALL HTTP traffic to the Websense gateway using WCCP. Apparently there are service groups corresponding to certain port numbers just wondering if there is any service group that includes ANY typ...

sindan by Level 3
  • 852 Views
  • 1 replies
  • 0 Helpful votes

I've done this in ROMMON on routers before but this is my first time doing this with an ASA - And I am not in rommon here. I have an interface called "test" for this purpose with: !interface GigabitEthernet0/1 nameif test security-level 0 ip address ...

HiI have ASA 5525X firewalls with FirePOWER. I have read the deployment guide but just have a few questions. The ASAs will be connected to my L3 core switch. I just want to confirm if my understanding of this is correct. This is just the initial setu...

Hello Friends, We have installed the ASA [Cisco Adaptive Security Appliance Software Version 8.4(7)3 --Device Manager Version 6.4(5) ] in our Data Center. All our branch offices are connected to the Data Center via MPLS network.  We are using the Web...