Network Security

Our  Management Provider is requesting for ASA5500 IPS license file to be uploaded to our ASA. We have already renewed our firewall contract with Cisco. Is this not automatic?

HI  How do we enable inspection traffic for h.323 and SIP on my Cisco ASA 5500 (ASA Version 8.4(7)3) via Cisco security manager (4.7).We have other traffic inspection enable currently. We know the process via CLI would like to do it via CSM due to or...

Hello all,I just set up a read-only profile for my ASAs. However, I'm not able only to use the function "Built Filter" in "Real Time Log Viewer". As you can see the attached image, I can't see the OK button.I'm using ISE, thus, the solution is setup ...

I have a lab set up to test ACL's with AD users/groups.Current setup:3 VMware instances on one host machine:Microsoft Server 2012 with Active Directory and DNSCisco Context Directory AgentWindows 7 This host is connected to the "Server" interface of ...

CSM ver 4.3.0, Build 10021 with PRO license...I recently did a hardware upgrade to an ASA under control of my above CSM. I'd like to now configure the new ports but I don't see them in CSM. How does CSM stay up to date with the hardware in my devices...

ive been trying for 2 days to get this VPN device to connect to a juniper.  i dont this ASDM is gunna cut it, i am trying to use CLI commands. the setup is fairly simple, but cisco changes too many commands and sytaxs...i am not pulling my hair out. ...

Can someone please tell me if it is possible to create sub-interface port channels on an ASA 5525? Here is the output I get which would lead me to believe that I can, but it is still not letting me:ASA-GW(config)# sh run int po1!interface Port-channe...

Hello!What is wrong with the code below?? I just want to access two RDP servers with the same public IP. I tried to use the port (33890) to differentiate each other. But did not work =/ nat (outside,inside) source static any any destination static in...

Dear Cisco, I add a command to monitor ASA5515-X Firewall Outside interface. I show the monitor interface and see the log that the Outside passed the tracking. Cisco configuration Guide says that Hello packet should be sent so as to track the interfa...

Under the NERC CIP program, we must identify all open services on our ASA firewalls. By open services, I mean anything that the firewall might accept and terminate an IP connection for. This would not apply to connections through the firewall. Since ...

HiI would like to know whether it is possible to assign 2 same subnets IP into 2 inside interfaces in ASA 5515-X.GigabitEthernet port 0/0 as WAN interface (IP: 10.162.21.1/24)GigabitEthernet port 0/1 as first INSIDE interface (IP:10.162.23.1/24 ,  fo...

Lets say I want to allow access to the ASA via SSH from one IP address on the outside.I know you would just configure this.....ssh 1.1.1.1 255.255.255.255 outsidenow lets say I already am using port 22 for something else and we cannot change that.How...

Hi, Does anyone know if there is an specific OID to poll an ASA's License information? "This platform has an ASA 5510 Security Plus license." Thanks!

Hi,I have a problem with VPN tunnel to Microsoft Azzure. The problem is in policy for some reason. I have ASA5512-X, version 9.1. There are two ASA in active/standby failover. This is the output from logs:Dec 03 2014 16:41:15: %ASA-5-713041: IP = 23....