Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have SG-500 Switch in our network where Polycom IP phones are connected. We are using basic QOS mode. Below is the configuration for port where phone is connected. AP-PUNE-ASW05#sh run int gi1/1/2interface gigabitethernet1/1/2 spanning-tree bpdugu...
Hello, We have Cisco ASA 5525 with Software Version 8.6(1)2. We have permitted all the traffic from inside to outside.Now we want to block P2P sharing Bit torrent to internet sites. Please help me with the configuration.We have DMZ setup & also inlin...
Hi Manannalage,
We are facing below issue. AP (AIR-LAP1131AG-A-K9) is not able to join controller 2504. Below is the console output.
NA-AA-AP1#ping NA-HQ-WLC-01Translating "NA-HQ-WLC-01"...domain server (172.16.1.21)% Unrecognized host or address, or...
This is queue 4 stats i see on port GE1/1/2 & 18 where phones are connected. I am not able to mirror trunk port on this switch. It shows status not ready. Gi1/1/49 is trunk port & below is its configuration.AP-PUNE-ASW05#sh run int g1/1/49interface ...
I also got below configuration from below link for Software Version 8.0 (2). Do you think it will work with Software Version 8.6(1)2?http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98684-pixasa-imblock-c...
