Dear All,From last few days i am trying to get the netflow logs from the router to my system but its not happening. here is one firewall cyberoam between router and system. can anyone tell me what exact port numbers need to be open on the firewall to...
Hello All,I just started learning Cisco ASA firewall and i got stuck up while understanding Cisco ASA's ACL configurations and your insight and help in this regard is highly appreciated. Refer the below image to understand my query better: My Net...
Hi,We have an active / standby failover pair of ASA 5540 running 8.2 version in a production environment.We have a task of upgrading ASA software to version 8.4.We're quite familiar with the process of upgrading and looked through zero downtime manua...
Hi,I've had a Cisco ASA 5505 firewall connected to a cable modem (Virgin Media, UK) for the past 3 years. In the last 6 months or so I have noticed that the ASA would drop the outside (internet) connection intermittently, usually at least once every...
Dears, i configured logging list contains messages 716001 and 716002.i configured the mail logging to send this list , but i received only 716002 and didn't receive 716001 on my mail.ASA version is 9.0(3) on ASA5520.Thanks,
HeyHave run in to a strange problem with the ASA-5555-X (one of many in a row). When traffic flows between the inside interfaces I get drops in traffic (testing with ordinary 32 ping). Both traffic leaving in ipsec tunnels and traffic passing straigh...
Hi, I have a question regarding the usage of objects in ACL on ASA 8.3+. The basics:-) I know that it is possible to use objects (not object-groups) in an ACL, and this is working fine here.-) Auto-NAT can be done within these objects, also working f...
Hi,I have a requirement of configuring a static NAT and I did the following, correct me if I am wrong.object network 10.1.1.3 host 10.1.1.6 nat (inside,outside) static <Real IP address>But for some reason the above configuration does not work, an...
Hi! I've configured a DMZ on my ASA 5510 using ASDM 6.4.The DMZ has a security level of 25. I added an ACL to allow the servers in the DMZ to communicate to a couple of our backend databases on our internal network over SQL ports.My problem is that...
Hi allI try to configure remote access VPN by using tunnel and I used ASA 5505, Cisco Anyconnect client.I can connect to VPN but I cannot remote connect to one PC inside LAN of ASA 5505 and cannot ping as well.From ASA 5505, I cannot ping the address...
Hi everybody,I am unable to access internet with one of the vlan. i have two vlansVLAN 2 192.168.1.0VLAN 8 172.168.1.0When i am on vlan 2 i can access to internet. when i work with vlan 8, i cannot access to internet. As a matter of fact VLAN 8 (...
Ok, so I have 3 cameras 172.20.101.15-17 all listen on port 7000. I want to forward them to a single outside IP, but when the user connects I need them to come in on ports 7001, 7002, 7003. I have forwarded ports before, but never in this fashion, an...
HiI have a Cisco ASA 5515-x with IOS 9.1.My problem is i have 6 interfaces (1 failover, 2 dmz, 1 outside, 1 inside and 1 spare) and I need to create new:DMZ - for new LAN (subnet).Outside interface - for new Site to Site VPN peer, there is a requirem...
Hi there,Recently received an ASA5510 for testing and just installed it on my home dsl service. I can go to certain web sites but on certain sites I can not. I've followed some of the postings and also this one, http://www.cisco.com/en/US/products/...
My PIX experience has clearly gone the way of the DoDo. I have a customer that has switched their internet provider, and is on a migration path to remove their existing PIX. The new internet connection is attached to an ASA, not the PIX, but servers ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM | ||
| 04-22-2026 11:56 AM |
| User | Count |
|---|---|
| 5 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
