Hi,we have 2 building connected with a bridge wireless that transport different vlans.We need now to dismiss this bridge and we will connect this networks through ipsec vpn site to site.We don't want to change the ip addresses so I'm wondering if it'...
Running an ASA5520 7.0(8) Started to experience problems with connectivity between 2 interfaces and one host.Checking my shuns the ASA show I have an entry similar to this. shun (net2) 4.4.4.4(server) 0.0.0.0 0 0 04.4.4.4 = Public address on one of o...
Hi, can any one tell me how do i pull the logs from SSM module to the cisco IME server for log analysis.i know that syslog is not supported in SSM and the only option is to have IME server...-Rajesh
Hi All,We want to ping all interfaces from an ASA from a monitoring server located in one Management DMZ.It works fine for the interface directly connected to the monitoring server, but it fails for all others,Any ideas on how to solve this issue ?Th...
Hi all,We are going to buy a firewall, but little confused in whether to choose ASA5510-SEC-BUN-K9 or ASA5520-BUN-K91. Does ASA5510-SEC-BUN-K9 support HA both active/active & active/standby ?2. The memory avaiable in ASA5510-SEC-BUN-K9 is 256MB, is ...
I have a NAM and NAS pair that I have recently upgraded from 4.1 to 4.7 using the proper upgrade path. These devices also received new IP addressing. My issue is that when a user is routed to the NAS the redirect page seems to point to the old IP ad...
Hello all,I need to implement VLANs mobility both in wired and in wireless network, according to the group that the user is part of Active Directory. how I do it?Thanks,Juliano Lopes
Hi,I'm running some testing on a FWSM at the moment using transparent contexts.I have one server sat behind an ACL at the moment with the following setup.interface Vlan20 nameif public bridge-group 10 security-level 0!interface Vlan21 nameif private ...
I've been fighting an issue for months where my other offices haven't been able to reach our internal web portal sporadically. I haven't had time to devote to the issue, because it was sporadic and I always had something else that took a higher prio...
All,I have a 5550 that I'm going to be setting up failover on when we get our second one soon. I have a couple of questions:1.) The current 5550 that we have has a public presence. Do I need to configure the standby with a physical public address als...
Hello EverybodyI have a solution where i implemented the NAC IN BAND - VIRTUAL GATEWAY with a CVPN 3000 to perform a compliance for VPN Remote Access.I need BYPASS the LAN-TO-LAN traffic , where can i configure the networks that are used for LAN-TO...
Hello,¿Does Cisco NAC solution for LAN supports another RADIUS server different than Cisco ACS?Thanks
Hi,What's different between CON-SUSA-IPS4260 & CON-SUSW-IPS4260? If we want to purchase second year of support for IPS4260 ( include H/W maintenance, S/W upgrade, signature upgrade ), which part number I must to purchased?Best Regards,Jackson Ku
Hi,I have an ASA5520 with 3 contexts one is the default route for the two others contexts. To interconnect them, I created a VLAN Interface in the system context that is shared with the 3 contexts. I can see the interface in each context. I can ping ...
Hello,we are running an ASA firewallsystem and gettingTeardown TCP connection 56410XXX for outside:XX.XX.XX.XX/1521 to inside_demo003:XX.XX.XX.XX/1199 duration 0:00:00 bytes 3334 Flow closed by inspectionAnyone can tell me, the"closed by inspection...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-06-2026 12:20 AM | ||
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM |
| User | Count |
|---|---|
| 3 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
