Network Security

We are trying to give home users, via their Internet connection, the  ability to call video conferencing systems at remote sites. From tests,  while calling the remote site video conferencing system, it continues  dialing and never connects. Here's w...

Hi All,I'm trying to do an upgrade from 3.3.0 SP1 to 3.3.1 with no success.  Every time the setup wizard bombs out with an error, checking the backup logs it appears the following is happening:No errors reported    Stopping database engine cmfEngSQL ...

Hi,We have a CSM installed on windows server, which has a syslog file defined for the given location: C:\Program Files\CSCOpx\log\syslog.log, due to which the C:\ Drive gets full and the CSM server does not respond. We then have to login by safe mode...

I have a router behind a Cisco ASA 5520. The router has interfaces which are carried on 2 seperate Crypto maps going to the same peer. I can ping across one of the interfaces but when I try to ping across the other it appears to be using the other Cr...

Hi All,I have CAS, CAM, ACS and WiSM. CAS configured as OOB Virtual IP. I need to place users in VLANs according to User Groups on Active Directory.I can configure dynamic VLAN assignment without NAC using WLC->ACS-AD scheme.But How can I configure d...

Good day,First time posting a new question.  I have many customers that have ASA in HA with Dual ssm-10 or 20s.  I want to know if anyone out there has a script already created that will,1. Connect to the IPS running on the ACTIVE ASA and pull the co...

HiGuysI have IPS 4215 with 6.0 image, 4 sensing Interfaces anlong with the C&C,i m confused a litlte bit about the sensing interfaces across the network what am thinking is as follow:IPS will be functions as inline mode1) Two sensing interfaces bridg...

Hi,    I would like to know if will be possible to have dynamic routing working into FWSM with multiple context in the future. I need this because I have two OSPF process working outside and inside de FWSM, so the FWSM should have the posibility of a...

Hello,I have the following network setup on my pix.Interface 0 is internet --static ipInterface 1 is internal  10.1.1.0 is regular computers.                                 vlan3 -- 10.1.3.0 is public internetAlso we have 2 dhcp scopes setup, one fo...

I have PIX515E Failover pair, the primary boots fine, but standby does not boot at all, no console output.If you try boot 30 times, one time it might boot up as normal, but 29 times no console output at all does not boot.IOS 8.03 running on both PIX....

Just testing RDP right now and it goes no where.  Not sure which it is either nat or acl that are messed upinterface ethernet0 autointerface ethernet1 100fullnameif ethernet0 outside security0nameif ethernet1 inside security100hostname ciscodomain-na...

Hi.i want to know that in failover of ASA 5540 ,can we use management interfase as a failover pair?

I am trying to forward tcp port 1042 from the outside port to the telnet port of a host on my inside network. The problem is that all packets are being denied by the implicit deny rule on the outside interface. I know that the access-list that I conf...

We currently receive syslogs (informational) for all connections but have recently deployed an auditing tool that requires that each ACL also be set to log. Is there a way to globally set all ACLs to log?