Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi! I've a switch (2950) with flat network with no configration at the ports. If i would to change the default vlan 1 ip address to a new network ip and default gw(different network segment from the existing one), because we are re...
hi! What's the easiest way that allow me to have simple email notification of successful backup of cucm? i look through the options available in the call manager but did really see that available, except the snmp striing or syslog setup. Any idea how...
hi! Is there any limit on the number of 3560 edge switches i can daisy chain using etherchannel? Currently i've 6 switches, i would like to connect another 2 switches. This setup is running on flat network. Thanks.
hi! I've some queries about how mpls from the provider work. I understand that we'll be provided a router from the provider of the mpls line eg. AT&T, Orange, and etc, and the telco will be able to provide QOS from there. Here are my questions:1) Do ...
hi! I've a wan interface that's 1000mbps in router A and another router that's connected to router A with port 100mbps. Can i fix both interface with speed 100 and duplex full for both sides? Will there be any issue?Thanks.
hi! thx for the reply. To add on to the question above, Can i've a 4503 main edge switch with 2x 3506 edge switches or more from different closets with the uplink to the 4503 switch? This setup is in the flat network environment, with a firewall con...
hi! i meant only one network segment in the branch office (it's a small office with less tahn 20 staffs), the HQ will have network with multiple segments and vlans. So, if that's the case, is the mpls gd to go? If possible i will not want to introdu...
hi! If different segments are used within the network instead of flat setup. the interface from the optimiser to the sw, is it a layer 3 interface or just one of the vlan will do?As of " But if you want specific groups access this MPLS lnk then you ...
hi! currently, the office is running on flat network with a vpn tunnel back to the hq through the internet line. If i would to replace the the vpn tunnel through internet with an MPLS line. Is it a must to have vlan configured internally within the ...
