Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm trying to find out if Cisco ASR5K supports radius for management purposes? I have been able to find references to TACACS+ but nothing for radius.thanks,Aqdas
Hello,I trying out the srp521w smb router and need some quidance configuraing QOS. I have enabled "Bandwidth Control' and added an entry for the voice vlan (priority high), but under QOS status i dont see any stats for the high priority queue. Anothe...
hello,i have just recently deployed qos on some of our rotuers and wanted to monitor them in solarwinds (which we use for network monitoring). So the problem i have run into is that when i poll the mib provided by cisco (cbqos) i get a graph with obj...
hello,had a question regarding the configuration of the ingree-queue on a 3560. Here is the configuration from my switchmls qos srr-queue input threshold 1 8 16mls qos srr-queue input threshold 2 34 66mls qos srr-queue input dscp-map queue 1 threshol...
hello,i have a test asn gw setup with 3 different service-flows.1- rtp traffic2- sip traffic3- default trafficwhen i attach an ata (spa2102) to a cpe i can surf the web, but my call fails. When i look at the gw router sip traffic is flowing and is is...
I have to say I did'nt look at it that way. No I feel embarassed, thanks for the reply and I believe all my srp questions and concerns are now gone. The only thing I wish cisco would add to this platform or any platform is the ability to capture some...
you were 100% correct on both issues. Another thing that bothering me is that i cant differentiate between sip and rtp using dscp values. this is extremelu important because these devices will act as trust boundries. Do you know if there is a way to ...
i figured out this problem. I had only configured 16kbps for sip and apparently that was not enough per call so i bumped it to 20kbps and everything started working. the sip/sdp packets i guess needed more bandwidth. the ATA initially tires to use g....
