Hi all, My NAC server was configured with AD SSO and was working till, we decide to change the untrusted interface ip address. When we eventually change the ip address to the orginal and restart the AD SSO service the SSO service refused to sta...
Hi all, My NAC server was configured with AD SSO and was working till, we decide to change the untrusted interface ip address. When we eventually change the ip address to the orginal and restart the AD SSO service the SSO service refused to sta...
Hello all,I have a very strange VPN issue that I cannot get to the bottom of... Hopefully someone can provide some assistance.The tunnel comes up fine, phase 1 and phase 2 complete successfully, but no traffic passes over the tunnel. This has been an...
Hi,Do you guys know if I can monitor the health of the VPN connections terminating on the ASA using SNMP?I have seen the Cisco Security Manager and other tools, but I need to know if I can really get this information from SNMP, and if so how?Thank yo...
I am trying to configure the HTTP(S) Timeout on our ASA 5510. Per MS Article 905013:We recommend that you increase the firewall time-out values for HTTP(S) requests to the Exchange Server Microsoft-Server-ActiveSync virtual directory to provide a r...
Hi guys, I have a CAM´s failover installed. I had seen high utilization of the ram memory in the 2 appliances. The utilization is higher than 80%. Anyone knows what is the cause for this memory use?Also, I have a NAC Profiler integrated with these CA...
I have a vendor who wants to access some of our staging servers over the Public Internet. Vendor will be sourcing from 201.57.56.10Our servers are on Inside Network and the addresses that the vendor need to access are:10.20.100.110.20.200.1Do I need ...
I am in the process of rebuilding my ASA 5510 8.0(5) firewall configs and I am up to the point of building the remote-access VPN tunnels.Now I am not sure if this is possible without a RADIUS or a VPN Concentrator but I figured I would try.What I am ...
Asa5505 suspends with "i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40". Entered rommon changed confreg-reg 0x41=not successful, load image via tftp still suspends. Installed image is ass723, also tried asa802 from another device with s...
Hey guys.is it possible to limit bandwith from lan interface to WAN interface ? We have 50 mbit internet connection, but we want to dedicate 5 MBit to LAN and 45 MBit to DMZ.Best regards Mikkel
I'm deploying NAC for a large enterprise. They would like the use the NAC for posture assessments but manual remediation. If the users do not meet the windows patch and AV requirements they are expected to manually remediate their systems, not using ...
hi,current ios 7.04 on pix515E doesn't support features like track link and many more, so i would like to upgarde it's ios.so can i further upgrade it that ios which is updated and will work on pix515E ?????????RegardsHasmukh Suthar
Hi,I'm configuring the FWSM at the moment, and I'm aware that each resource partition in the standard 11+the Backup partition gives you a set of 19219 rules, and further splits those rules into different types of ACE entries.For example, ACL's are 14...
we have an ASA 5520 & 5540. my understanding says the connection limit on 5520 is around 120000 connections.Please correct if this is wrong.got certain doubts on connection limits:- does this mean limit on tcp or udp or both- what happens if it excee...
does cisco firewall transparent mode support morethan 2 interface in any of the ios of CISCO PIX 515E ?if yes than tell me which ios does that support and suggest me the ios version which i can use for CISCO PIX 515ERegardsHasmukh
the latest ios for ips is 7.0(2)and the latest ime is 7.0.2if i already installed the ime with 7.0.1 but the ips image now is 7.0(2),must i upgrade the ime to 7.0.2?if it's necessary..how to do it..i checked the ime soft ,but i can not find any upgr...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-02-2026 03:17 AM | ||
| 07-01-2026 01:03 PM | ||
| 06-24-2026 08:00 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM |
| User | Count |
|---|---|
| 5 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |