Network Security

My network security gadget in the ASDM dashboard for my ASA-IPS's show 0 events and 0 risk Threat even thou the settings is configured to point to the virtual sensor VS0 and teh grap settings is mark to show all graphs. For the Risk v Threat graph se...

Hi,    I have the following configurations in my ASA.static (outside,inside) 10.6.25.2 192.168.0.20 netmask 255.255.255.255access-list outside_pat extended permit ip any host 10.6.25.2access-list inside_nat0_outbound extended permit ip host 1.1.1.1  ...

Hello,I am trying to allow the inside network to be able to use a Windows share (445) created on a server in the DMZ. I have tested the share from another server in the DMZ and it is working. The server in the DMZ (10.0.1.50) and the machine on the i...

Dear Pros,We have the  network designed and running as below.Main site:Dual  core 6500 as distribution switchFwsm as front end firewallMPLS  WAN routerDR site:MPLS WAN routerLAN  3560 switch connecting local PCs and serversWhen we ping the server in ...

HI,we are using PIx 515E as our firewall in our networkIn Firewall we configured remote VPN access for users to access from homenow we are planning to moniotor who is authenticated on remote VPN through the syslog serverwhich faclilty level will give...

Hello group,I need to monitor the sessions handled by PIX/ASA units running release 7.2. I need statistics like how many SYN packets were sent from clients to servers protected by the PIX/ASA; how many of these SYN received the SYN/ACK; how many sess...

Hi, I have a 1,6 Mbit/sec link and wish dedicate 50kbit for specific host. The another hosts in the network can use 160kbit. Look the configuration that I did:hostname(config)# priority-queue outsidehostname(config-priority-queue)# queue-limit 122hos...

Hi All,I had changed to ASA5505 for replace Asus router.But I find the maximum download speed is only 6xx kb/sec with 30M PPPOE Broadband connectionAfter change back to Asus router, I can get back to 3 mb/sec.Anyone know the reason?  I should change ...

Hi, I have a problem with restore config on Cisco ASA5505, on the first 5505 I have made a config backup form the GUI:tool --> backup configuration --> backup allnow on the second ASA5505 (with the factory value) from the GUI:tool --> restore configu...

Hi there guys.I have a NM-CIDS module, and after to made a password recovery proccess (for 4.1 version) we can not login to the IPS.It seems like the image is not in the flash.After the router goes up, this is the status f the NM:Router#service-modul...

hi all,i have upgraded my ASA 5540 to ver 8.2.2 and the new asdm 6.5.2and i see a new tab called dropped packets rate.how can i see which machines are alerting?currently have 127 ACL dropped packets inspection dropped 0.also the possible scan and syn...

Hi Guys and Experters.Normaly I don't buy firewall to protect my dedicate server b/c i can lease from my hosting provider but now I moved my server to colocation near my place so i can have a hand on expericense.I have 3 ips address which i received ...

Hi,How can I allow only specific websites and block rest of internet in Cisco ASA firewall.Sine it is very small network, I am not preferring to implement URL filtering server (Web sense) along with ASA.Thanks in advance

Dear Sir/MadamWe have  cisoc sensro 4255 the OS version 2.4.30-IDS-smp-bigphys and virus update is Virus Update V1.4 .Please lt me know is there any upgrade avliable for the OS version and also the Virus version .Secondly the Cisco Intrusion Preventi...