11-18-2017 09:58 AM - edited 02-21-2020 06:46 AM
Is it possible to bind multiple interfaces on the 5506-x into one logical interface? The office I am installing the 5506 has 3 PC's and one server. I will be putting the server in a DMZ area and I would like to use three physical interfaces on the ASA for the three PC's referencing the "inside" logical name. I am trying to eliminate a switch if possible and use the ASA as a switch. Thanks!
Solved! Go to Solution.
11-18-2017 05:44 PM
Hello Phil,
Yes you can!
Starting on version 9.7 you can use something named "BVI interface" where you can have multiple ports on the ASA on a defined VLAN/Subnet.
I believe this link should be good enough for you to start :)
Any queries, let me know
11-18-2017 05:44 PM
Hello Phil,
Yes you can!
Starting on version 9.7 you can use something named "BVI interface" where you can have multiple ports on the ASA on a defined VLAN/Subnet.
I believe this link should be good enough for you to start :)
Any queries, let me know
11-21-2017 11:42 AM
Hi Julio,
This is what I needed. I will test and see how it works. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide