Can't connect FWSM

lannerkorea · ‎09-28-2012

I'm running two C6509 Chassis with FWSM and ACE module install on each chasiss.

I have no problem with session into 1 FWSM and 2 ACE modules.

But 1 FWSM module can't be access by session command.

As I understand two FWSM module status is OK, and working fine.

When I tried to session into FWSM, I got these messages..

-----------------------------------------------------------------------------------------------

6509A#fwsm

The default escape character is Ctrl-^, then x.

You can also type 'exit' at the remote prompt to end the session

Trying 127.0.0.11 ...

% Connection timed out; remote host not responding

----------------------------------------------------------------------------------------------

As I mentioned above, I can session into ACE on same chassis

-----------------------------------------------------------------------------------------------

NBS_NW1_DS_6509A#ace

The default escape character is Ctrl-^, then x.

You can also type 'exit' at the remote prompt to end the session

Trying 127.0.0.40 ... Open

ACE_1 login: admin

------------------------------------------------------------------------------------------------

And I tried to ping to each of them,

ping 127.0.0.11 and ping 127.0.0.40

Three of them were replied, but but ping to problem FWSM wasn't replied

please give any kind of advices ....

Harish Balakrishnan · ‎09-28-2012

Hello Sun Cha,

can you give me show module on that switch where you can no t access fwsm

regards

Harish

lannerkorea · ‎10-03-2012

This is result for show module

--------------------------------------------------------------------------------------------------------------------------------------------

6509A# sh modu

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 6 Firewall Module WS-SVC-FWM-1 SAD113203B5

2 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAD112404FK

4 1 Application Control Engine Module ACE20-MOD-K9 SAD113407RD

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1134YF76

6 2 Supervisor Engine 720 (Hot) WS-SUP720-3B SAL1133XYMD

7 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL13442JB9

8 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL1134Y2ZM

9 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1135ZG8P

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 0007.0e0f.0f1c to 0007.0e0f.0f23 4.2 7.2(1) 3.2(10) Ok

2 001b.d59b.738c to 001b.d59b.738f 2.6 12.2(14r)S5 12.2(18)SXF1 Ok

4 001d.4587.5244 to 001d.4587.524b 2.2 8.6(0.252-En 3.0(0)A1(4a) Ok

5 0016.4708.5c3c to 0016.4708.5c3f 5.4 8.4(2) 12.2(18)SXF1 Ok

6 001a.2f3c.2b78 to 001a.2f3c.2b7b 5.4 8.4(2) 12.2(18)SXF1 Ok

7 0026.9925.c5c8 to 0026.9925.c5f7 3.4 12.2(18r)S1 12.2(18)SXF1 Ok

8 0007.0e31.cf20 to 0007.0e31.cf4f 1.10 12.2(14r)S5 12.2(18)SXF1 Ok

9 001d.4537.a660 to 001d.4537.a68f 2.6 12.2(14r)S5 12.2(18)SXF1 Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

2 Distributed Forwarding Card WS-F6700-DFC3B SAD113408JP 4.6 Ok

5 Policy Feature Card 3 WS-F6K-PFC3B SAL1134YCWL 2.3 Ok

5 MSFC3 Daughterboard WS-SUP720 SAL1134Y13W 3.0 Ok

6 Policy Feature Card 3 WS-F6K-PFC3B SAL1134YFDE 2.3 Ok

6 MSFC3 Daughterboard WS-SUP720 SAL1134YLGP 3.0 Ok

7 Distributed Forwarding Card WS-F6700-DFC3B SAL13463LKS 4.8 Ok

8 Distributed Forwarding Card WS-F6700-DFC3B SAD1134044S 4.6 Ok

9 Distributed Forwarding Card WS-F6700-DFC3B SAD1134044Z 4.6 Ok

Mod Online Diag Status

---- -------------------

1 Pass

2 Pass

4 Pass

5 Pass

6 Pass

7 Pass

8 Pass

9 Pass

-------------------------------------------------------------------------------------------------------------------------------------