cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
807
Views
0
Helpful
1
Replies

can't connect to aip-ssm-20

mulhollandm
Level 1
Level 1

folks

i've installed a new aip-ssm 20 into my asa 5540 and ran setup to assign it an ip address but i can't connect to it

the management IP is on the same network as the asa internal interface and i've patched the managment port into the same switch

both asa and the aip-ssm management port are on the same vlan

the switch however isn't showing a mac address for the aip card so i can't connect to it or ping it

any ideas?

the results of a show conf are

ASA-IPS# sh conf

! ------------------------------      

! Current configuration last modified Wed Sep 14 23:34:19 2011

! ------------------------------

! Version 7.0(2)

! Host:                                        

!     Realm Keys          key1.0               

! Signature Definition:                        

!     Signature Update    S480.0   2010-03-24  

! ------------------------------

service interface

exit

! ------------------------------

service authentication

exit

! ------------------------------

service event-action-rules rules0

exit

! ------------------------------

service host

network-settings

host-ip 10.x.0.54/29,10.x.0.49

host-name ASA-IPS

telnet-option disabled

access-list 10.x.132.227/32

1 Reply 1

mulhollandm
Level 1
Level 1

folks

got this sorted

aip-ssm was ok

i had a vlan configuration issue in my infrastructure

thanks to anyone who had a look at my post

Review Cisco Networking for a $25 gift card