cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5098
Views
10
Helpful
3
Replies

Cannot connect to ASA using https

I'm trying to access my box ASA 5540 by https://ipaddress but I can't. I'm using Linux. I already have installed ASDM (when it works) and I can enter in the box by ASDM.

The Mozilla show the message: "Error code: ssl_error_no_cypher_overlap".

But I was looking and I did these tests.

OSInternet Explorer 7 and 8
Mozilla Firefox 3.6
Google Chrome
Linuxdoesn't workdoesn't workdoesn't work
Windows XPWorks Finedoesn't workWorks Fine
Windows Vista / Windows 7doesn't workdoesn't workdoesn't work

I've already clear all configuration of browsers, reboot the box, reboot the machines, re-generate a crypto key on ASA, enable and disable the http server and didn't work.

st02/sec/act# sh run http
http server enable
http 192.168.1.0 255.255.255.0 management
http 0.0.0.0 0.0.0.0 external

st02/sec/act# sh run asdm
asdm image disk0:/asdm-625.bin
asdm history enable

Looking to ASA log it possible see:

6|Apr 20 2010|14:01:19|725001|192.168.100.100|35539|||Starting SSL handshake with client external:172.28.7.94/35539 for TLSv1 session.

Can anyone help with this situation.

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

Check the output of: sh run all ssl

Make sure you have all the combinations of ssl encryption algorithm as per the following:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/s8.html#wp1406272

ssl encryption 3des-sha1 des-sha1 rc4-md5 aes128-sha1 aes256-sha1

View solution in original post

3 Replies 3

mvsheik123
Rising star
Rising star

Hi,

You might checked on this - but just incase, For Mozilla, I found the below...

https://support.mozilla.com/en-US/forum/1/585826

hth

MS

Jennifer Halim
Cisco Employee
Cisco Employee

Check the output of: sh run all ssl

Make sure you have all the combinations of ssl encryption algorithm as per the following:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/s8.html#wp1406272

ssl encryption 3des-sha1 des-sha1 rc4-md5 aes128-sha1 aes256-sha1

the command

ssl encryption 3des-sha1 des-sha1 rc4-md5 aes128-sha1 aes256-sha1

solve the problem. Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers