08-25-2022 04:29 PM
Hi Community
I am trying to connect to the ASDM web interface from a PC connected directly to the management port of the ASA5520.
Below is the configuration: -
1. asdm
2. Management Interface
3. http Server
4. On the PC I have connected a cat6 ethernet cable directly to the management port on the FW. I have given a static IP address of 192.168.5.100. I can ping 192.168.5.1 but I get this
whats going on? what have I missed?
thanks
JP
Solved! Go to Solution.
08-25-2022 06:31 PM
08-25-2022 04:37 PM
try http:// not https://
08-25-2022 04:43 PM
tried that too
08-25-2022 05:17 PM - edited 08-25-2022 06:32 PM
check below comment
08-25-2022 05:26 PM
Already did that!
08-25-2022 05:27 PM
I feel as though its something to do with the TLS version on the ASA FW
08-25-2022 06:16 PM - edited 08-25-2022 06:23 PM
https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html
first let check the compatibility.
check link above for compatibility between ASDM and ASA ver.
share the following
ASAa# show run all ssl
08-25-2022 06:26 PM
08-25-2022 06:31 PM
08-25-2022 06:58 PM
looked promising but alas same browser error
08-25-2022 09:02 PM
ok solved downloadig the activation key for 3DES-AES worked for me
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide