04-15-2005 04:14 PM - edited 02-21-2020 12:05 AM
I tried following the model here: http://www.cisco.com/en/US/netsol/ns340/ns394/ns171/ns27/networking_solutions_white_paper09186a008018914d.shtml
but after doing so, the situation was actually reversed. While connected to the vpn client you were able to browse the internet but not able to access vpn resources. I undid and redid the configuration several times to rule out keying in problems.
Can one help with this problem... If needed Ill post necessary configs from my router.. Thanks
(btw: do these froms have a search?)
04-15-2005 09:59 PM
Hello,
I susptect that the acl is misconfigured. Could you post the configs please?
(And yes, the search box is on top right corner, you can search the last 3 years posts)
Regards,
Mustafa
04-20-2005 12:46 PM
I am having the same problems with pix 501. With split tunnel, I get web but no lan access. Without split tunnel, full lan access, no web. My acl for the splitTunnel is:
permit ip host 192.168.1.0 any
Is this wrong?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide