Cisco AnyConnect VPN and Dynamic Secured Route

[Mr_London_uk]

Hi Folks,

Wondering if you can help me solve an issue.

We are using split tunnel mode and I have some specific IPs that are going over the VPN i.e 10.0.0.1/24, 172.16.20.1/24.

My Client IP assignment is issuing the clients IPs from 192.168.1.1/24. So when a user connects to the VPN their local IP is 192.168.1.X. 

What I would like to do is dynamically add the client IP to the Secured Route when they are connected i.e when the user connects, they are given 192.168.1.11/32 and their Secured Route displays:

• 10.0.0.1/24
• 172.16.20.1/24
• 192.168.1.11/32

Is it possible to dynamically add the client IP upon connecting?

Thank you.

[Sheraz.Salim]

I have never seem this and dont think this is possible. 

let wait and see what other respected member have to say on this.

[Rob Ingram]

Hi,
I am not aware you can dynamically add networks as a secured routes. Why not add the network 192.168.1.0/24 into the split tunnel ACL?

HTH

[Mr_London_uk]

Thanks everyone.

I've added to the ACL already but wanted to limit the IP range.