06-18-2012 09:50 AM - edited 03-11-2019 04:20 PM
I've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?
06-18-2012 09:58 AM
Hi Adam,
You would need to download the ASDM image from the link below, make sure your login id has proper downloading rights:
Hope that helps.
Thanks,
Varun Rao
Security Team,
Cisco TAC
06-18-2012 10:45 AM
Hi Adam!
If the ASDM-image is still on the flash:
Do a "show flash" and look for the asdm-image file. It's named asdm-xxx.bin, where xxx=version.
Then in config mode, type "asdm image disk0:/asdm-xxx.bin"
Hope this helps!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide