01-08-2019 07:39 AM - edited 02-21-2020 08:38 AM
Hi,
I have setup an ASA 5505 with a layer 3 switch so that I can access it with an anyconnect VPN from the outside network.
I cannot ping the ASA 5505 or connect to it from the public network to the outside interface.
I have shown some running config can you please advise if I have done something wrong?
Thank you
---------------------
Layer 3 Switch Run
---------------------
interface GigabitEthernet0/36
switchport access vlan 8
switchport mode access
spanning-tree portfast
!
interface Vlan8
ip address x.x.x.65 255.255.255.248
---------------------
ASA Run
---------------------
ASA Version 9.1(5)16
!
interface Ethernet0/0
switchport access vlan 8
!
interface Ethernet0/1
switchport access vlan 10
!
interface Vlan8
nameif outside
security-level 0
ip address X.X.X.60 255.255.255.248
!
01-08-2019 07:47 AM - edited 01-08-2019 07:48 AM
Hi,
What about the default route configured in ASA...?
From ASA are you able to ping any public IP..???
Share the ACL configured which is bind to the outside interface.
01-08-2019 08:48 AM
what is the default gateway route set in ASA. from ASA are you able to ping .65 , from outside are you able to Ping .65 ?
01-08-2019 08:51 AM
Share the config mate here are very great people to help you
01-10-2019 03:10 AM
01-10-2019 03:16 AM
you have provided us a very little information. would be better if you upload your configuration of firewall and switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide