02-12-2010 09:06 AM - edited 03-11-2019 10:08 AM
Hi,
My Cisco ASA 5505 will now not boot to any versions of the OS v8.x. (8.0.2 through to 8.2.2)
It will boot to v7.24 with no problem.
It has 256MB RAM and 128MB flash.
When attempting to boot to v8.x it just sticks on "Loading..." and won't proceed.
Does it need a firmware upgrade or anything else?
I have upgraded several other 5505's from 7x to 8x with no issue.
Thanks.
S.
02-13-2010 11:32 AM
There is no hardware-upgrades available for 5505. Either your boot-image is broken (verify checksum or down
load a new one) or there is a hardware-failure that only addresses from 8.x-code...
Br Jimmy
02-13-2010 04:50 PM
Try to download the code one more time and tftp it to the asa and see if that helps.
I have not heard of this issue before on an ASA5505 but I have on an ASA5510.
-KS
04-27-2014 10:35 AM
Hate to revive an old thread, but I am having this exact issue on my 5510..
I've upgraded the ram to 1GB (3rd party ram) and still have the same problem...
What can I do?
7.1.5 works fine, as well as 7.2.5.. but anything 8.x or greater doesn't boot......
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide