09-14-2018 01:10 AM - edited 02-21-2020 08:14 AM
Hello, I have a problem with upgrade of cisco asa firepower 5506 on cisco asa.
Now I have version 6.0 and I want to upgrade it to 6.1.
Could you please help me to find cli comands to do it ?
I need to do upgrade because ASDM not working with error:
asdm is unable to load the firewall´s configuration
I have already tried to change java versions, but it is still the same
Thank you
09-14-2018 01:38 AM
It's not supported by Cisco nor recommended but it can be done. You can see this blog post with instructions:
https://ciscoskills.net/2017/07/12/update-firepower-devices-manually/
More importantly you should fix the ASDM access first. If it's not working now you might make things worse by upgrading without performing the recommended Upgrade Readiness Test.
09-14-2018 02:11 AM - edited 09-14-2018 02:15 AM
Thank you for answer, could you please help me find out where could be a problem with ASDM access ?
When I disable firepower, it is working properly but when I enable firepower, ASDM not working.
Version of ASA is : 9.5.1
ASDM 7.9.2
SFR 6.0.0-1005
Thank you very much
09-14-2018 02:20 AM
How are you doing "disable Firepower"?
What symptom do you get when ASDM isn't working? Can you share a screen shot?
09-14-2018 02:23 AM
Hello,
disable mean unplug management port from cisco asa
Thanks
09-14-2018 02:27 AM
Perhaps you have it misconfigured to use a duplicate IP address.
Please provide output from the following ASA cli commands:
show ip address
show module sfr detail
09-14-2018 02:33 AM
I guess IP config should be correct.
here it is.
Thanks
09-14-2018 04:57 AM - edited 09-14-2018 04:57 AM
Hello, I find out that problem is in win10, which I´m using.
I testet it on win 7 and everything working properly.
I have already tried to change java 1.8.151 but it was same.
Thanks
09-14-2018 07:20 AM
ASDM looks for an installation of the 32-bit Java version. If all you have is 64-bit it can fail to open properly.
In any case, you can upgrade from ASDM now.
09-18-2018 03:41 AM - edited 09-18-2018 03:42 AM
Hello, I´m using 32-bit version, so it will be different issue, do you have any other idea ?
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide