cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1089
Views
0
Helpful
2
Replies
michael
Beginner

Cisco ASA 5506-X with FirePOWER Services Startup wizard... Auto update server url?

I can't seem to locate the URL required in the start wizard to complete step 10...  Do I need to open a case to obtain the info? ty Michael

2 ACCEPTED SOLUTIONS

Accepted Solutions
Ravi Singh
Rising star

The Auto Update Server (AUS), a component of the Cisco Security Management Suite, is a tool for upgrading PIX firewall software images, ASA software images, PIX Device Manager (PDM) images, Adaptive Security Device Manager (ASDM) images, and PIX firewall and ASA configuration files.

Although you can update software and ASDM/PDM images for any ASA or PIX device, to update configuration files you must use the Security Manager application to create and deploy the configurations

You can use AUS with any ASA or PIX device and operating system version supported by Security Manager (for a list of devices, see Supported Devices and Software Versions for Cisco Security Manager on Cisco.com). However, the device must be running in single-context mode; you cannot use AUS with devices that host security contexts. You can manage up to 1000 devices with a single AUS server.

For more detail please see the below link.

User Guide for Auto Update Server 4.3

View solution in original post

Marvin Rhoads
VIP Community Legend

If you don't run Cisco Security Manager then uncheck the box and you can safely skip that step.

View solution in original post

2 REPLIES 2
Ravi Singh
Rising star

The Auto Update Server (AUS), a component of the Cisco Security Management Suite, is a tool for upgrading PIX firewall software images, ASA software images, PIX Device Manager (PDM) images, Adaptive Security Device Manager (ASDM) images, and PIX firewall and ASA configuration files.

Although you can update software and ASDM/PDM images for any ASA or PIX device, to update configuration files you must use the Security Manager application to create and deploy the configurations

You can use AUS with any ASA or PIX device and operating system version supported by Security Manager (for a list of devices, see Supported Devices and Software Versions for Cisco Security Manager on Cisco.com). However, the device must be running in single-context mode; you cannot use AUS with devices that host security contexts. You can manage up to 1000 devices with a single AUS server.

For more detail please see the below link.

User Guide for Auto Update Server 4.3

Marvin Rhoads
VIP Community Legend

If you don't run Cisco Security Manager then uncheck the box and you can safely skip that step.

Create
Recognize Your Peers
Content for Community-Ad