11-01-2015 01:02 PM - edited 03-11-2019 11:49 PM
Hi,
I am interested weather cisco FIRESIGHT is a must to manage FirePower services on ASA 5506-x ? If not, do you get same functionality and same GUI locally on ASA ?
Also, I am interested if Firepower supports BANDWIDTH CONTROL.
I could not find this information anywhere :(
Thank you in advance,
George
11-01-2015 08:19 PM
Hi Giorgi,
The ASA5506-x has on-box management for managing FirePOWER services. You can configure and monitor FirePOWER functionality using the ASDM.
For QoS on asa you refer following links:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/82310-qos-voip-vpn.html
https://supportforums.cisco.com/document/7011/asa-qos
Hope it helps!!!
R.Seth
11-02-2015 12:12 AM
As already mentioned by Rishabh, you don't need Firesight for the 5506-X. But if you have spare ressources on a VSphere-Host, you should think about using the FireSIGHT MC to manage FirePOWER on the ASA. There is much more flexibility in Monitoring then with the ASDM.
04-08-2019 12:54 AM
Hello
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide