cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1053
Views
0
Helpful
2
Replies

cisco asa 5510 firewall Banner is not working .

Hi All ,

 

I am Felling problem when i am configuring the banner on my firewall.

When I connect to my firewall through console the banner is not coming .As we know the banner should come first in console connection then it should prompt for username and password then again the banner should come after successful banner .

Also when i exit in the priviledge mode the loggoff come followed with banner .

 

Please suggest the solution I will be very thankful to all of you.

 

Please find the attached banner configuration on my firewall.

 

banner login * * * * * *  W A R N I N G     W A R N I N G * * * * * *
banner login If you are not authorized to access this system DISCONNECT NOW.
banner login This system is exclusive property of Mirae Asset Global Investments (India) Pvt Ltd.  
banner login Unauthorized access to this system is forbidden by company policy. 
banner login If you do not have authorization you are warned to exit immediately.
banner login Actual or attempted use, access, communication or examination
banner login by unauthorized persons is a rule violation.
banner login Any other activity which is not authorized will be subject to investigation.


banner motd * * * * * *  W A R N I N G     W A R N I N G * * * * * *
banner motd If you are not authorized to access this system DISCONNECT NOW.
banner motd This system is exclusive property of Mirae Asset Global Investments (India) Pvt Ltd.  
banner motd Unauthorized access to this system is forbidden by company policy. 
banner motd If you do not have authorization you are warned to exit immediately.
banner motd Actual or attempted use, access, communication or examination
banner motd by unauthorized persons is a rule violation.
banner motd Any other activity which is not authorized will be subject to investigation.
              
 

2 Replies 2

nkarthikeyan
Level 7
Level 7

Hi ,

 

You need to have the banner exec followed by motd/login configuration in order to display it when you login through ssh/telnet or thru console it will display the warning or notification content...

 

for eg:

banner exec  *** ASA5550***
banner motd ***********************************************************************
banner motd Warning
banner motd Only Authorized person can access.
banner motd ***********************************************************************

^C

 

something like this....

 

Regards

Karthik

Hi Karthik,

 

Thanks you very much for your support.

I will let you after making changes as suggested by you.

 

 

Rgds,

Madhuraj

Review Cisco Networking for a $25 gift card