09-04-2012 02:16 AM - edited 03-11-2019 04:49 PM
Hello,
I Am Working With An ASA 5510, I Reset To Default And Then Upgraded The IOS From Asa708-K8.bin to Asa821-k8.bin Successfully (copy tftp disk0).
My Concern Is When I Issue The Dir Command for disk0 i cant see the IOS file or any files for that matter
Below are extracts & the running configs. Kindly help.
ciscoasa# dir all
Directory of disk0:/
2 drwx 8192 05:56:01 Sep 03 2012 log
9 drwx 8192 05:56:09 Sep 03 2012 crypto_archive
56 drwx 8192 06:24:07 Sep 03 2012 coredumpinfo
260145152 bytes total (243343360 bytes free)
Directory of disk1:/
No files in directory
260153344 bytes total (260153344 bytes free)
Directory of system:/
1 ---- 0 00:00:00 Jan 01 1970 running-config
No space information available
ciscoasa# dir flash:
Directory of disk0:/
2 drwx 8192 05:56:01 Sep 03 2012 log
9 drwx 8192 05:56:09 Sep 03 2012 crypto_archive
56 drwx 8192 06:24:07 Sep 03 2012 coredumpinfo
260145152 bytes total (243343360 bytes free)
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2 8192 Sep 03 2012 05:56:01 log
9 8192 Sep 03 2012 05:56:09 crypto_archive
56 8192 Sep 03 2012 06:24:07 coredumpinfo
57 43 Sep 03 2012 07:22:36 coredumpinfo/coredump.cfg
260145152 bytes total (243343360 bytes free)
ciscoasa#
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2 8192 Sep 03 2012 05:56:01 log
9 8192 Sep 03 2012 05:56:09 crypto_archive
56 8192 Sep 03 2012 06:24:07 coredumpinfo
57 43 Sep 03 2012 07:22:36 coredumpinfo/coredump.cfg
260145152 bytes total (243343360 bytes free)
ciscoasa#
ciscoasa# sh run
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
!
interface Ethernet0/0
nameif INSIDE
security-level 100
ip address 1.1.1.1 255.255.255.252
!
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
pager lines 24
logging asdm informational
mtu INSIDE 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-508.bin
asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:6f6e03d0465f46237036c0d8ee31f5ca
: end
ciscoasa#
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
Loading /disk0... Booting...
Platform ASA5510
Loading...
Cisco Adaptive Security Appliance Software Version 8.2(1)
Solved! Go to Solution.
09-04-2012 01:10 PM
Good one
Pls kindly mark the post answered so others can learn from your question/answer.
09-04-2012 02:22 AM
Looks like it has been upgraded to version 8.2.1.
You can check by issuing "show version", and it should provide you with the current version.
09-04-2012 02:39 AM
Hello Jenny,
I Have Confirmed That It Has Upgraded. I Am Just Curious As To Why I Can't See The IOS file When I Issue The Dir Command. Thanks.
09-04-2012 11:17 AM
Hi,
I Managed To Resolve, I Upgraded The IOS From Asa 821-k8.b To Asa841-k8.bin. It Worked Perfectly, Albeit A Few Hithces With "No images in /Error 15: File not found" Errors.
ciscoasa# dir
Directory of disk0:/
82 -rwx 15841428 08:31:06 Sep 04 2012 disk0
3 drwx 8192 05:56:00 Sep 03 2012 log
6 drwx 8192 05:56:08 Sep 03 2012 crypto_archive
11 drwx 8192 06:24:06 Sep 03 2012 coredumpinfo
86 -rwx 24938496 09:19:28 Sep 04 2012 asa841-k8.bin
89 -rwx 15841428 09:51:34 Sep 04 2012 asdm-641.bin
260145152 bytes total (202989568 bytes free)
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
82 15841428 Sep 04 2012 08:31:06 disk0
3 8192 Sep 03 2012 05:56:00 log
6 8192 Sep 03 2012 05:56:08 crypto_archive
11 8192 Sep 03 2012 06:24:06 coredumpinfo
12 59 Sep 04 2012 09:07:34 coredumpinfo/coredump.cfg
86 24938496 Sep 04 2012 09:19:28 asa841-k8.bin
89 15841428 Sep 04 2012 09:51:34 asdm-641.bin
260145152 bytes total (202989568 bytes free)
ciscoasa#
Mucho Gracias
Message was edited by: Tonny Nthiwa
09-04-2012 01:10 PM
Good one
Pls kindly mark the post answered so others can learn from your question/answer.
09-05-2012 02:48 AM
Thanks, It Does Not Give The Option To Mark My Answer As The Correct Answer So I Had To Mark Yor Reply As The Correct Answer. Anyone Looking For Solution Will Still Be Able Find It.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide