08-13-2010 04:19 AM - edited 03-11-2019 11:25 AM
Hi,
I have one Cisco Catalyst 2960 connected to ASA 5520 as Trunk. The version on ASA is 7.2(2).
The port on the 2960 connected to ASA is reporting lost of undersize packet.
Is there any problem with this on version 7.2(2) or shuld I continue search for the problem.
Best Regards
Magnus
Solved! Go to Solution.
08-13-2010 06:40 AM
Hello,
Undersize packet is not a problem. Cisco devices keep a count of how many
undersize packets they have received but will still pass them through.
Mostly, undersize packets are generated due to driver issues. If you think
that it is still a problem, upgrade the code on the firewall.
Hope this helps.
Regards,
NT
08-13-2010 06:40 AM
Hello,
Undersize packet is not a problem. Cisco devices keep a count of how many
undersize packets they have received but will still pass them through.
Mostly, undersize packets are generated due to driver issues. If you think
that it is still a problem, upgrade the code on the firewall.
Hope this helps.
Regards,
NT
08-13-2010 07:09 AM
Okey!
Thanks!
Best Regards
Magnus
11-09-2010 11:04 PM
Hello,
Please check the following DDTS/Bug if your Catalyst 2960 is working before 12.2(37)SE.
CSCsh17651
3560 connected via dot1q cause undersize counters to incress
Regards,
Shin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide