Network Security

Hi everybody,We've recently adquired an ASA 5505 with a base license, but we realised that we needed trunking and we upgradeded to Secury Plus (ASA5510-SEC-BUN-K9) by adquiring a ASA5505-SEC-PL. Now we have trunking but other trouble has appeared.Con...

I am in the process of upgrading all of our sensors to the 7.x code so that we can benefit from senderbase/global threat correlation.  I have been going over the syslog document and dont see anything that I can use to alert me as to when Global Threa...

Hello,Has anyone got v8.3 up and running on a 5500 ASA ?My old nat commands are no longer supported and I'm not certain of the best format for the new ones.I've studied the migration guide but just want to confirm my thoughts.My nat commands are belo...

Hello,I want to know if only to get a contract (smartnet) with the ASA5505-U-AIP5P-K9  I can have the availability of make signature file update or if exist some contract apart for this.Thank´s in advance.Manuel Domínguez

Lost passwords, ran password recovery, file transfed, I can see the "Received 73728 bytes"  but the PIX just hangs, never asks "Do you wish to erase the passwords?"It there a hardware reset?

I am having an issue with windows update through the NAC agent (clean access).  I recently installed updates on my computer, but after the restart, it still prompted me with the "Download updates from microsoft" prompt.  However, there are no updates...

Hi, we recently put a Mac Server into the mix and want to access the Cisco PIX 501 from it. We can get to the address, the certificate notice, and even the login - then it stops and never opens. Certainly this must be doable? Tried via Safari and Fir...

I have recently migrated a site from PIX 6.3 using a 3005 for remote access connected to a DMZ interface. The 3005 would assign a IP pool per group and on the PIX this IP range was NATed to the inside interface. The inside interface could reach all t...

When IPSEC traffic is de-crypted on a cisco 877 Dialer interface, what is the next step? If the Dialer interface is a member of the 'outside-zone' (ZBF) and the packet SA is 10.1.1.1 and the DA is 10.2.1.1 (which is part of the 'inside-zone'), does t...