Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
2156
Views
10
Helpful
5
Replies

Cisco ASA - added new line ACL but its not working

Go to solution
LovejitSingh1313
Level 1
Level 1

‎01-25-2021 09:16 AM

Hello Experts @balaji.bandi   @Rob Ingram  @Marvin Rhoads  @Giuseppe Larosa @Marius Gunnerud 

 

I want to block 10.170.150.188 IP blocked for Outside interface (Internet access).

 

 

TMGHQ5516(config)# packet-tracer input inside tcp 10.170.150.188 443 8.8.8$

Phase: 1
Type: CAPTURE
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f16587e56f0, priority=13, domain=capture, deny=false
hits=14546899901, user_data=0x7f1658c3d9e0, cs_id=0x0, l3_type=0x0
src mac=0000.0000.0000, mask=0000.0000.0000
dst mac=0000.0000.0000, mask=0000.0000.0000
input_ifc=inside, output_ifc=any

Phase: 2
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f167cfafb00, priority=1, domain=permit, deny=false
hits=32706810754, user_data=0x0, cs_id=0x0, l3_type=0x8
src mac=0000.0000.0000, mask=0000.0000.0000
dst mac=0000.0000.0000, mask=0100.0000.0000
input_ifc=inside, output_ifc=any

Phase: 3
Type: ROUTE-LOOKUP
Subtype: Resolve Egress Interface
Result: ALLOW
Config:
Additional Information:
found next-hop 72.138.52.93 using egress ifc outside

Phase: 4
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group inside_access_in in interface inside
access-list inside_access_in extended permit ip any any
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f166130d210, priority=13, domain=permit, deny=false
hits=13886, user_data=0x7f167021d580, cs_id=0x0, use_real_addr, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=inside, output_ifc=any

Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
object network obj_any
nat (any,outside) dynamic interface
Additional Information:
Dynamic translate 10.170.150.188/443 to 72.138.52.94/447
Forward Flow based lookup yields rule:
in id=0x7f167d19cef0, priority=6, domain=nat, deny=false
hits=347183725, user_data=0x7f167d19b790, cs_id=0x0, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=any, output_ifc=outside

Phase: 6
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f167bbfe230, priority=0, domain=nat-per-session, deny=false
hits=535995168, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=6
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=any, output_ifc=any

Phase: 7
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f167cfb7e60, priority=0, domain=inspect-ip-options, deny=true
hits=402098788, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=inside, output_ifc=any

Phase: 8
Type: FOVER
Subtype: standby-update
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f167d04d950, priority=20, domain=lu, deny=false
hits=126412143, user_data=0x0, cs_id=0x0, flags=0x0, protocol=6
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=inside, output_ifc=any

Phase: 9
Type: FLOW-EXPORT
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0x7f16603fb6e0, priority=18, domain=flow-export, deny=false
hits=60170405, user_data=0x7f1660406e00, cs_id=0x0, use_real_addr, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=inside, output_ifc=any

Phase: 10
Type: USER-STATISTICS
Subtype: user-statistics
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
out id=0x7f16582627d0, priority=0, domain=user-statistics, deny=false
hits=311842728, user_data=0x7f1658222190, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=any, output_ifc=outside

Phase: 11
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Reverse Flow based lookup yields rule:
in id=0x7f167bbfe230, priority=0, domain=nat-per-session, deny=false
hits=535995170, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=6
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=any, output_ifc=any

Phase: 12
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Reverse Flow based lookup yields rule:
in id=0x7f167cf325b0, priority=0, domain=inspect-ip-options, deny=true
hits=382998220, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=outside, output_ifc=any

Phase: 13
Type: USER-STATISTICS
Subtype: user-statistics
Result: ALLOW
Config:
Additional Information:
Reverse Flow based lookup yields rule:
out id=0x7f1658263760, priority=0, domain=user-statistics, deny=false
hits=309534523, user_data=0x7f1658222190, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0
input_ifc=any, output_ifc=inside

Phase: 14
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 540390589, packet dispatched to next module
Module information for forward flow ...
snp_fp_inspect_ip_options
snp_fp_tcp_normalizer
snp_fp_translate
snp_fp_adjacency
snp_fp_fragment
snp_fp_tracer_drop
snp_ifc_stat

Module information for reverse flow ...
snp_fp_inspect_ip_options
snp_fp_translate
snp_fp_tcp_normalizer
snp_fp_adjacency
snp_fp_fragment
snp_fp_tracer_drop
snp_ifc_stat

Phase: 15
Type: ROUTE-LOOKUP
Subtype: Resolve Egress Interface
Result: ALLOW
Config:
Additional Information:
found next-hop 72.138.52.93 using egress ifc outside

Phase: 16
Type: ADJACENCY-LOOKUP
Subtype: next-hop and adjacency
Result: ALLOW
Config:
Additional Information:
adjacency Active
next-hop mac address e481.846f.d577 hits 13798391 reference 3394

Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: allow

 

 

 

 

 

 

 

 

access-list inside_access_in line 1 extended permit ip any 10.130.160.0 255.255.254.0 (hitcnt=364) 0x7538f31f
access-list inside_access_in line 2 extended permit ip 10.130.160.0 255.255.254.0 any (hitcnt=0) 0x3546d3ab
access-list inside_access_in line 3 extended permit object-group DM_INLINE_SERVICE_1 any any (hitcnt=144) 0x08e5d918
access-list inside_access_in line 3 extended permit icmp any any (hitcnt=144) 0xd6183fb5
access-list inside_access_in line 3 extended permit icmp any any echo (hitcnt=0) 0x925f140d
access-list inside_access_in line 3 extended permit icmp any any echo-reply (hitcnt=0) 0xb2f4960f
access-list inside_access_in line 4 extended permit ip any object TMGHQ_192.168.6_24NET (hitcnt=2566) 0x44e98379
access-list inside_access_in line 4 extended permit ip any 192.168.6.0 255.255.255.0 (hitcnt=2566) 0x44e98379
access-list inside_access_in line 5 extended deny ip host 10.170.150.188 interface outside (hitcnt=0) 0x94b8af68
access-list inside_access_in line 6 extended permit ip 10.170.150.0 255.255.254.0 192.168.125.0 255.255.255.0 (hitcnt=4) 0x1213fb13
access-list inside_access_in line 7 extended permit ip any any (hitcnt=24917) 0xa925365e

 

 

 

 

 

 

 

 

 

 

Its still hitting line 7 but nor line 5 of ACL?  Can you guide what to do ?

 

Thanks 

 

0 Helpful
2 Accepted Solutions

Accepted Solutions

Go to solution
Rob Ingram
VIP
VIP
In response to LovejitSingh1313

‎01-25-2021 09:38 AM

Right, then put another ACL rule above that deny rule that permits traffic to 10.0.0.0 255.0.0.0 or more specifically your internal subnets. This should permit traffic the internal access and then match the deny rule below to block the internet access.

View solution in original post

0 Helpful

Go to solution
balaji.bandi
Hall of Fame
Hall of Fame
In response to LovejitSingh1313

‎01-25-2021 09:41 AM

now you blocked from source to any, you need also ACL to allow others internal networks.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

0 Helpful
5 Replies 5

Go to solution
Rob Ingram
VIP
VIP

‎01-25-2021 09:24 AM - edited ‎01-25-2021 09:28 AM

@LovejitSingh1313 That's because the destination should be "any" not the outside interface as you've defined. Remove line 5 and re-add with the destination as "any", ensure this rule as above the permit ip any any rule.

Go to solution
LovejitSingh1313
Level 1
Level 1
In response to Rob Ingram

‎01-25-2021 09:35 AM

Hello @Rob Ingram  @balaji.bandi 

 

I did the change.

 

access-list inside_access_in extended deny ip host 10.170.150.188 any

 

And it blocked the outside access but it also block intra subnet access (like from 10.170.150.88 to 10.170.150.23 ). My motive is to block internet access only .

 

 

Thanks 

0 Helpful

Go to solution
Rob Ingram
VIP
VIP
In response to LovejitSingh1313

‎01-25-2021 09:38 AM

Right, then put another ACL rule above that deny rule that permits traffic to 10.0.0.0 255.0.0.0 or more specifically your internal subnets. This should permit traffic the internal access and then match the deny rule below to block the internet access.

0 Helpful

Go to solution
balaji.bandi
Hall of Fame
Hall of Fame
In response to LovejitSingh1313

‎01-25-2021 09:41 AM

now you blocked from source to any, you need also ACL to allow others internal networks.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

0 Helpful

Go to solution
balaji.bandi
Hall of Fame
Hall of Fame

‎01-25-2021 09:28 AM

this deny right ? what should be source here ?  -

access-list inside_access_in line 5 extended deny ip host 10.170.150.188 interface outside (hitcnt=0) 0x94b8af68

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card