cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
490
Views
0
Helpful
2
Replies

Cisco ASA - Internet problems

raul.sensi
Level 1
Level 1

I have a Cisco ASA 5520 that we was working properly. I tried to create a VPN IPSEC to test but when I finished the wizard I lost the conection between the inside interface and outside. I use other interface for DMZ and other for printers network but this adapters are working properly. I have reviewed the NAT's and the ACL's but I don't see the problem, any idea?

I have delete the VPN IPSEC but it's still not working and I have the network down   I'm desperate

1 Accepted Solution

Accepted Solutions

Julio Carvajal
VIP Alumni
VIP Alumni

Hello Raul,

This got to be because of the NAT 0 rule of the Crypto ACL

Do the following

Share the ACL used on the NAT 0 rule

and also the crypto acl on the crypto map..

Regards,

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

View solution in original post

2 Replies 2

Julio Carvajal
VIP Alumni
VIP Alumni

Hello Raul,

This got to be because of the NAT 0 rule of the Crypto ACL

Do the following

Share the ACL used on the NAT 0 rule

and also the crypto acl on the crypto map..

Regards,

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC

Thanks jcarvaja,

I solve the problem. I reviewed my NAT Rules and I saw a new NAT 0 Rule with source: lan_network and destination any interface (outbound).

Rgds

Review Cisco Networking for a $25 gift card