04-17-2014 11:13 AM - edited 03-11-2019 09:05 PM
I know this question has been asked a thousand times, and Ive read maybe 20-30 articles and cisco support forums, but I am still unable to get this thing working. I will even get a prompt to enter my password, but Remote Desktop will hang. Is this an issue with RDP and the ASA or possibly my NAT config? Thanks a ton to anyone who reads this. (Ive passed the ASA exam so this is doubly embarrassing)
Note: I am trying to have port 21 accept the connection for RDP and forward them to this box.
Ive included the config below but here are the meat and taters.
object network obj_rdpsrv
host 10.0.1.2
nat (inside,outside) static interface service tcp 3389 ftp
access-list 123 extended permit tcp any host 10.0.1.2 eq 3389
access-group 123 in interface outside
Note - packet tracer is happy with this too using the following parameters -
packet-tracer input outside tcp 8.8.8.8 1234 <outside interface IP> 21 detailed
09-02-2014 02:53 PM
Hi malering,
Remove this line.
no nat (inside,outside) static interface service tcp 3389 ftp
Copy this line instead:
nat (inside,outside) static interface service tcp 3389 3389
Thanks
Rizwan Rafeek
09-02-2014 10:47 PM
Hi,
Can you try the port-forwarding with a high port numbers? such as 10389 or something else instead of using 21 which is a reserved port for ftp.... and also you have to check the rdp machine that it is accepting the forwarded port number for rdp connections?
Regards
Karthik
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide