Cisco ASA remote Access VPN

[DEV1389]

Hello ,

I have configured Cisco ASA 5512 with Active/Standby failover Remote VPN access. It is working fine, but the goal is that, we need to provide VPN remote access over WLAN interface with same security level on Inside and WLAN interfaces. NAT, ACL and same-security permit inter-interface configrued and properly working for remote VPN users. But the behind WLAN interface VPN are not able to connect to remote users. The snapshot of Diagram is also attached for consideration.  Is the idea to troublshooting this issue. 

With Regards

DEV1389

[MHM Cisco World]

you need routing to vpn pool toward the ASA,

since this active/stadby 

then add ip route <vpn pool> <active ASA inside/wlan interface>